JBL is a familiar name in the band audio industry. JBL’s earbuds are popular among those who love to listen to music.
If you have bought a pair of JBL earbuds then you must know how to connect JBL earbuds to an iPhone.
| Topic | How to Connect JBL Earbuds to iPhone |
| Category | How To Guides on Earbuds |
So in today’s post, we will show you step by step process of how to connect JBL earbuds to iPhone.
Prepare the JBL Earbuds for Pairing
JBL earbuds must be paired with the system before connecting to the iPhone Follow the simple steps to pair your JBL earbuds with iPhone;
1. Make Sure the Earbuds Have Full Charge
Before pairing the JBL earbuds, make sure the JBL earbuds are fully charged.
If the earbuds are not charging, fully charge the JBL earbuds first Watch the LED lights on the earbuds fill up to indicate charging.
Then fully charge your earbuds before proceeding to the next step.
2. Turn on the JBL Earbuds and Put them in Pairing Mode
To put the JBL earbuds into pairing mode, hold down the power button until the LED light starts flashing. When the LED light turns on, you know the JBL earbuds are ready to pair with the iPhone.
How To Connect JBL Earbuds To iPhone
When the JBL earbuds are ready to pair, follow these steps to connect your earbuds to your iPhone:
1. Open iPhone Settings and go to Bluetooth Settings
To connect JBL earbuds to the iPhone, you need to go to your iPhone’s Bluetooth settings. To access Bluetooth settings, go to Settings > Bluetooth.
2. Select JBL Earbuds From the List of Available Devices
After going to Bluetooth settings, turn on Bluetooth on the iPhone and mark the name of JBL earbuds in the list of devices in the search list.
3. Tap the JBL Earbuds to Start the Pairing Process
When you get the device name of the JBL earbuds to pair with, click on it. The iPhone will then connect to your JBL earbuds.
4. Wait Until the Pairing Process is Complete
Please wait a while to connect your iPhone with JBL earbuds as this pairing process may take some time to complete.
The light on the JBL earbuds will stop flashing when connected. This indicates that the JBL earbuds are now connected to your iPhone.
Fixing common Issues To Connect JBL Earbuds To iPhone
There could be a few reasons why JBL earbuds are having trouble connecting to an iPhone. That reason and its solution are given below.
1. Check if Bluetooth is Turned on on your iPhone
Before connecting JBL earbuds to the iPhone, you need to check if Bluetooth is turned on on the iPhone.
If it is not enabled, go to Settings and go to the Bluetooth option. Then turn on Bluetooth. Settings > Bluetooth
2. Make Sure Your JBL Earbuds Are in Pairing Mode
JBL earbuds cannot connect to iPhone unless in pairing mode Hold down the button on the earbuds to put the JBL earbuds into steering pairing mode.
3. Forget Your JBL Earbuds and Pair them Again
If you still can’t connect JBL earbuds to your iPhone, turn off JBL earbuds and pair them again. Go to iPhone Settings and go to Bluetooth.
Then tap on the “i” icon next to the name of the JBL earbuds. Then click on the “Forget This Device” option.
The JBL earbuds will be removed from your iPhone’s list of Bluetooth devices. Then follow the steps to pair your JBL earbuds with your iPhone again
4. Check for Interference
Sometimes it happens that when your iPhone is connected to another earbud device, it interferes with the Bluetooth connection with the JBL earbud.
When connecting the iPhone and JBL earbuds, bring the two devices close to connecting. Make sure no other device is near at that time. Turn off the device if necessary.
5. Update your iPhone software
After that, if you face a problem connecting JBL earbuds with your iPhone, first update the iPhone software if it is updated. Go to Settings > General > Software Update to check if the iPhone is updated.
6. Reset Your JBL Earbuds
If none of the above solutions work, reset the JBL earbuds system. Doing so will delete all devices paired with those JBL earbuds.
This will reset your JBL earbuds to factory settings. To reset the earbuds, roughly chip the power for ten seconds. Hold the power button until the LED light flashes twice.
Watch Video!
Also Read:
- How To Pair Sony Wireless Earbuds?
- How To Keep Earbuds From Falling Out When Running?
- How to Sleep With Earbuds?
- How To Make Cheap Earbuds Sound Better?
Frequently Asked Questions (FAQs)
How do I connect my JBL earbuds to my iPhone?
To connect your JBL earbuds to your iPhone, follow these steps:
1. Turn on Bluetooth on your iPhone.
2. Take out your JBL earbuds from the charging case.
3. Press and hold the button on the back of the earbud until the LED light on the earbud starts flashing.
4. On your iPhone, select “JBL” from the list of available Bluetooth devices
5. Wait for the earbuds to connect to your iPhone. Once connected, a confirmation message will appear on your iPhone screen.
Why won’t my JBL earbuds connect to my iPhone?
If your JBL earbuds won’t connect to your iPhone, try the following troubleshooting steps:
1. Make sure your JBL earbuds are charged.
2. Make sure your iPhone is in range of the earbuds and its Bluetooth is turned on.
3. Restart both your JBL earbuds and your iPhone.
4. Reset your JBL earbuds by placing them in the charging case and holding down the button on the back of the case until the case’s LED lights up.
5. Forget the JBL earbuds from your iPhone’s Bluetooth settings and try pairing them again.
How do I know if my JBL earbuds are connected to my iPhone?
If your JBL earbuds are connected to your iPhone, you will see a confirmation message on your iPhone screen. In addition, earbuds lights will stop flashing and remain steady. You can also check your iPhone’s Bluetooth settings to see if your earbuds are listed as a connected device.
Can I connect my JBL earbuds to multiple devices?
Yes, you can connect your JBL earbuds to multiple devices but you can only pair your earbuds with one device at a time. To connect to a different device you must first disconnect from the first device and then connect to the second device.
How do I disconnect my JBL earbuds from my iPhone?
To disconnect your JBL earbuds from your iPhone, go to your iPhone’s Bluetooth settings and select “JBL” from the list of connected devices. Then tap on “Disconnect” next to JBL earbuds. Alternatively, you can turn off Bluetooth directly on your iPhone, which will disconnect any Bluetooth devices connected to your iPhone.
Conclusion
Connecting JBL earbuds to an iPhone is a very simple process. Anyone can do it. It can enhance your music listening experience.
By following the steps above, you can quickly connect JBL earbuds to your iPhone.
Remember before connecting the JBL earbuds to the iPhone, go to the Bluetooth settings on the iPhone and locate the name of the JBL earbuds.
If there is a problem with it, solve it first. You can enjoy your favorite music with high-quality sweet sound by connecting JBL earbuds to your iPhone.
